@xyon126 Try this code: https://fxdreema.com/shared/OaBJphFqd

However, in order to use it you have to create a variable that you will call: LOT which you will initialize with 0 (zero), and which you will put in place of the buy and sell lots in the market. And also you will have to create 2 constants, 1 you will call it: PERCENTAGE, and you will put the percentage% of Equity you want to put into play,(to calculate 1% you will have to write 0.01 while to calculate 10% you will have to write 0.1). And the other you will call it: MINIMUM_LOT, and inside you will put the value 0.02 that is the minimum of the lot beyond which you must not go down. I hope I was clear.

@xyon126 If you want to get the percentage as you say you have to change it in this way: (AccountEquity () * PERCENTAGE / 10000000);

As for the 2 blocks located on init, you can very well delete them because they are not needed, I just forgot to delete them.

@xyon126 Hi if you only want 0.5 % of capital, you have to multiply the capital by 0.005.

If, on the other hand, you want the capital + 0.5 % you have to multiply the Capital by 1.005

But you have to keep in mind that if you use that modified formula I gave you last time: (AccountEquity () * PERCENTAGE / 10000000); for equity, and which can also be used very well for balance making it become like this: (AccountBalance () * PERCENTAGE / 10000000);

0.005 becomes 0.5 and 1.005 becomes 100.5

I hope I was clear

@xyon126 In this example there are 3 variables. in one there is net profit from current positions; in the second there is the net profit of closed positions; and in the third there is the total net profit, (ie the sum of the net profit of both current and closed positions).
https://fxdreema.com/shared/hlsyDBhHb

@xyon126 No I don't speak Spanish, I just renamed the variable, as you renamed it, that is: beneficio_neto.

@xyon126 If the net profit of the open positions, you need to put it in a variable, then try this: https://fxdreema.com/shared/Dh1v3Zbfe

@xyon126 So it is a momentary profit, which can be both positive and negative

@xyon126 This block: Check block (unrealized), should work, because it calculates the sum of the positive and negative profit of the open positions.
https://fxdreema.com/shared/HreRjfcDd

@xyon126 I can't tell you, unfortunately I've never worked with draw lines.

@xyon126 Hello. in this case you have to put 100%
because the fxdreema algorithm transforms dollars into lots by multiplying: 3000 x 0.00001 = 0.03
or by dividing 3000/100000 = 0.03

If you would have put 200% the result would have been:
6000 x 0.00001 = 0.06 or: 6000/100000 = 0.06
etc.etc.

In practice, the budget is halved, doubled or tripled, multiplying everything by 0.00001 or dividing by 100000.

Regarding the par (EURUSD, GBPJPY) etc. it is not specific to a single pair, but is good for all par pairs.

@xyon126 Hi if you only want 0.5 % of capital, you have to multiply the capital by 0.005.

If, on the other hand, you want the capital + 0.5 % you have to multiply the Capital by 1.005

But you have to keep in mind that if you use that modified formula I gave you last time: (AccountEquity () * PERCENTAGE / 10000000); for equity, and which can also be used very well for balance making it become like this: (AccountBalance () * PERCENTAGE / 10000000);

0.005 becomes 0.5 and 1.005 becomes 100.5

I hope I was clear

@mabz_h try this way

https://fxdreema.com/shared/yc6r9Z2Ec

@xyon126 If you want to get the percentage as you say you have to change it in this way: (AccountEquity () * PERCENTAGE / 10000000);

As for the 2 blocks located on init, you can very well delete them because they are not needed, I just forgot to delete them.