My MA Cross Strategy won't work in the mt5 tester...please help. :(

[fxbam]

I'm not sure why it won't work in the strategy tester. I must be missing something but I'm not sure what? It waits for one moving average to cross the other then waits for a candle to close in the opposite direction before entering a trade. Does anyone know what I'm missing? https://fxdreema.com/shared/SdaB6yVCc

New link below

I've modified the construction numerous times but can't get it to work in the mt5 tester. New construction here...https://fxdreema.com/shared/JEFQsV7jc
2022.03.28 16:14:22.291 Core 1 Trade_lower_than=2
2022.03.28 16:14:22.291 Core 1 Min_Bear_Candle_Size=2
2022.03.28 16:14:22.291 Core 1 Max_Bear_Candle_Size=15
2022.03.28 16:14:22.291 Core 1 Min_Bull_Candle_Size=2
2022.03.28 16:14:22.291 Core 1 Max_Bull_Candle_Size=15
2022.03.28 16:14:22.291 Core 1 MagicStart=7715
2022.03.28 16:14:22.291 Core 1 final balance 100.00 USD
2022.03.28 16:14:22.291 Core 1 2022.03.25 22:59:59 Backtested in 1.69 seconds
2022.03.28 16:14:22.291 Core 1 2022.03.25 22:59:59 Average ticks per second: 256
2022.03.28 16:14:22.291 Core 1 2022.03.25 22:59:59 Expert Advisor self terminated
2022.03.28 16:14:22.291 Core 1 GBPJPY,M5: 431717 ticks, 1704 bars generated. Environment synchronized in 0:00:04.679. Test passed in 0:00:01.863 (including ticks preprocessing 0:00:00.047).
2022.03.28 16:14:22.291 Core 1 GBPJPY,M5: total time from login to stop testing 0:00:06.542 (including 0:00:04.679 for history data synchronization)

I'm not sure what I am missing? I've changed it several times hoping to solve the issue but haven't had any success. I know I'm probably overlooking something very simple but I don't know what it is. Any suggestions would be greatly appreciated and help me climb out of this confusing mess.

[jstap]

@fxbam the cross only works on a particular candle, you could set this a earlier candle ID to closing in another direction, you don't need a once per bar if you have a no trade block as only 1 is allowed, maybe use if no trade is not, time/day filters are better at the top if not activated it stops all below blocks working, you cannot compare body size to a MA, use open, close, high, low only use close if ID1 or greater, I use a if trade block rather than the yellow dot, this stops the filters from deactivating trail when in use