GOOD MORNING FREINDS
IN MT5 PANNEL , UNDER COLUMNS THEIR ARE MANY IMPORTANT PARAMTERS LIKE DAILY CHANGE , BUY VOLUMES , SELL VOLUMES .. ECT. - PLS SEE THE IMAGE ..TKS 
THE QUESTION IS HOW CAN LET FXDREEMA READ THESE IMPORTANT PARAMETERS TO CREATE MY EA BASED ON THEM AND WITHOUT USING EXTERNAL INDICATORS WHICH MAKES THE OPTIMIZING LATTER MORE TIME COSUMING ??
HOPE YOU CAN HELP WITH THIS , TKS.
RGDS
https://fxdreema.com/shared/5s4IuvC1c
Good day
Hope you can help me with this, tks
What I need is :
Open ONE buy position if the accumulation distribution in the current bar is LOWER than the accumulation distribution of the previous bar close
Open ONE sell position if the accumulation distribution in the current bar is LOWER than the accumulation distribution of the previous bar close.
in flat market , it is happening that in the same bar the accumulation distribution if passing above and below its value in the previous bar close , so I want it to open one buy and one sell position during this bar ,but actually what is happening is that if it opens the buy first it dos not open the sell until the next bar and vice versa
what is the solution pls ?
rgds
THANK YOU TO YOU AND TO FXDREEMA.. MATTER SOLVED
GOOD DAY
https://fxdreema.com/shared/mK43ayw5b
AS Y OU SEE IN THE ATTACHED PROJECT I AM USING THE HOUR FILTER BLOCK
PLS : HOW TO PUT THE "HH:MM" IN A VARIABLE TO OPTIMIZE THE BEST WORKING TIME OF THE DAY? WHICH DATA TYPE I HAVE TO PUT WHEN I CREATE THE VARIABLE ? I PUT "STRING" , "DOUBLE" BUT THEY DO NOT WORK..!!
PLS HELP , TKS
RGDS
MR JSTAP , I FOUND IT ,..YOU ARE GREAT..THANK YOU..
BUT NOW THE REMAINING PROBLEM IS HOW CAN I MAKE THE EA STOP WORKING ONCE THE TARGET EQUITY REACH ? AND HOW I CAN MAKE THE EA RE-START AGAIN AT A CERTAIN TIME IN THE NEXT DAY..??
PLS HELP WITH THIS .. TKS
RGDS
GOOD DAY
https://fxdreema.com/shared/5YbpU9MPb
I MADE THE ABOVE EA BUT DOS NOT SEAMS TO WORK WELL Ö I TRIED TO USE DELAY BLOCK BUT MQL VPS DO NOT ALLOW DLL ..
PLS HELP , TKS
GOOD DAY,
I WANT TO PUT THE ACCOUNT EQUITY AT THE DAY START (DAY CANDEL OPEN TIME) IN A VARIABLE.
THEN WHEN THE ACCOUNT GROW FOR X% TO CLOSE ALL OPEN TRADES .
THEN TO START AGAIN WITH THE NEXT DAY CANDLE OPEN..!!
I AM NOT ABLE TO PUT THE DAY START EQUITY IN A VARIABLE..
AND THEN I COULD NOT FIND A WAY TO MAKE THE EA START AGAIN WITH THE NEXT DAY START..
HOPE YOU CAN GIVE ME SOME INDICATIONS ABOUT HOW TO DO THAT...!!
THANKYOU VERY MUCH FOR ALL YOUR HELP
RGDS
thankyou Mr jstap for your replay
but : is it correct like that : https://fxdreema.com/shared/5fP8kc5yc ???
will this switch on every time cross happens ?
do i need to connect the reset block ?
pls try to clarify as much as possible .. thank you for your time..
rgds
GOOD DAY
https://fxdreema.com/shared/rvllUMC4b
Hope you can help me with this simple matter that i could not solve PERFECTLY...!!
i want to open ONLY ONE position each time the MA cross happen , the problem is that the EA now continue opening more and more positions for all the period of the candle cross until comes the new candle..
i do not want to use candle Id solution (like when candle Id 1 cross) because in this case i will loose the signal since the position will be opened only at the new candle , instead i want to open the position as soon as the cross happen and at this cross only ONE position must be opened , and continue opening ONE new position for each new candle cross.
thank you for your support
rgds
GOOD DAY
https://fxdreema.com/shared/JpO9OQUPc
EVEN THOUGH ITS FEW MONTHES I AM STUDDYING FXDREEMA BUT I STILL NEED YOUR HELP ABOU THIS DIFFICULT QUESTION , SURE OF YOUR HELP ..
SIMPLY : HOW TO SAVE IN A VARIABLE THE INDICATOR VALUE AT THE MOMENT OF OPENING EACH NEW TRADE???
I want to store the value of the volume indicator at the moment of opening the initial trade in a variable, and then compare the indicator's value on each subsequent tick with its value at the last previous trade. Above, is the Expert Advisor I created, the problem is that it doesn't link the indicator's value to the trade at the moment of opening. As you can see from the attached screenshot, the indicator's value keep changıng for both the open trade and its current value with each tick. In reality, the indicators value for the open trade should be fixed (must change only when new trade is opened ) , and the value for each tick should change. However, what's happening with the attached Expert Advisor is that all three values are changing together...!!"
pls help....tks
SURE , THANK YOU , IT IS FEW MONTHES I AM TRYING , STILL I NEED MORE, TKS
sorry i were not aware about the possibility for normalyzing the blocks number.. i will work on it , thankyou for you all support so far.
rgds
yes i did try with gierfox , edge , and chrome.
anyway , with the solutioni invented as described above the matter is solved.. it is now just to help other users about how to pass this matter.
thank you
NO MY FRIEND , I RENAMED ALL BLOCKS IN PROGRESSIVE NUMBERS STARTING FROM 1 TILL ARRIVED 550 AT THE END , NOTING THAT THE NUMBERS GEVIN BY FXDREEMA MAIN MENEU ARE SO HUGE NUMBERS AND ARRIVES TO HUNDREDS OF MILLIONS.. LOOKS STRANGE , ANYWAY , WHEN I DID THAT EVEN IT TOOK SO LONG TIME TO DO , THINGS SSTARTED TO RETURN NORMA, I CAN NOW COPY PUST FROM THE EA WINDOW WITHOUT PROBLENS WITHOUT NEED TO DRAG FROM THE MAIN MENUE...PRIVIDED THAT WHEN I COPY PUST AGAIN I MUST IMMEDIATELY CHANGE THE NUMBERS GEVIN BT FX DREEMA AND RENAME IT WITH MY PROGRESSIVE NUMBERS.
PLS COMMENT AND INSTRUCT IF IT IS CORRECT TO CONTINUE LIKE THAT OF IF I HAVE TO ELSS..TKS
GOOD DAY AGAIN..
SOMTHING LOOKS VERY STRANGE , I SUCCEEDED TO COPY BLOCKS FOLLOWING THE FOLLOWING PROCEEDURE:
I TRY TO COPY ONE BLOCK ONLY , IF I SUCCED THE SYSTEM GIVE IT A NUMBER BUT I IMMEDIATELY CHANGE THE NUMBER TO A NEW NUMBER , THEN I PROCEED TO THE NEXT BLOCK AND SO ON....I DID IT FOR 15 BLOCKS SO FAR..
OF COURSE THIS IS A TEMPORAL SOLUTION BUT I STILL NEED YOUR SUPPORT TO FIX THIS ISSUE... PLS HELP , TKS
RGDS
NO SIR , PROBLEM APPEAR EVEN COPIENG ONE OR TWO BLOCKS.
I USED DIFFERENT COMPUTER (IN THE CASE I MAY AD SOMTHIGN WRING IN MY COMPUTER) BUT STILL THE SAME ...!!!
THE PROBLEM DISAPPEAR ONL IF I DRAGE THE BLOCKS FROM THE MAIN MINUE...!!
IF YOU ALLOW , I CAN MAKE A SCREEN VIDEO SO THAT YOU CAN SEE ...!!
RGDS