Posts made by Giovanni

@l-andorrà
Sorry for the delay in answer. But yesterday I was unable to connect to FxDrema and today I was very busy.
I will try your project and then let you know if I understand something.
Meanwhile, thank you for the advice.

@l-andorrà
Hi.
The purpose of this project is to have 10/30 euros of profit for each open series, an with more cross.
I can change the -20 pips to -10/50 pips away on the last open trade it depends on market volatility.
Let's not forget that it is a martingale system. I certainly cannot predict whether the price will go down or up after the first trade open. In any case there will always be a retracement during the day.
Furthermore, having a buy system and a sell system on each cross, they should give profits at the end of the day.
As I repeat, I use it as a test in buy and sell in addition to the EA "ProfitAtClose" and for the moment it works well but that's not what I want. Infact, I have a single profit target for buy and sell trades while they must be separated.
Each buy or sell system must have its own profit target.
We only need to add the profit target of 10/30 Euros on the average of the price of each open series (from 1 to 7 trade) and the maximum number of trades which in my opinion should not exceed 7 loss-making trades.
Let's try. !!!!!!!
Thanks and regards.

@l-andorrà
Hi,
The simplest system by far is the "shared / X8sZAFIK" attachment. Of course, it should be in buy and Sell to be able to use them on multiple crosses.
Now I am using it only on the cross GbpUsd, one in buy and one in sell, and I use in support with a separate graph an EA called "CloseAtProfit" which closes the trades in buy and sell when it reaches the profit set in currency.
This system is very simple as you can see, and we should add the target profit and stop loss in currency in the system in Buy and the profit and stop loss in currency in the system in Sell.
I can't use the CloseAtProfit EA that operates on all crosses because as you can imagine, it would be difficult to reach profit on several crosses, so I would be forced to open all the crosses in buy and sell and add the EA CloseAtProfit for each open cross creating a lot of confusion on my screen.
In addition to the profit target we should add the number of trades beyond which it does not open other positions.
I think it's a simple thing for an expert like you. In any case, if you can help me or not, I thank you in advance.
Best Regards.
Giovanni

@l-andorrà

@l-andorrà
Thanks l'andorrà for your advice. Let's try to develop it together if you want. I designed another one today (see "shared / cM8jWucZd") but unfortunately I am too old and I struggle to understand and also my English language is not very good.
This latest project works correctly but I still have the problem that it cannot close the trades with the profit set at 5/10 Euro. I used it today in real account forcing me to close manually, otherwise it closes with a slight loss.
I would say to focus only on this latest project which I think is as risky as any martingale system, but the most important thing is to be able to close with 2/3 Euro for each series of trades and on at least 4 crosses.
What do you say ?
Thanks again.

@l-andorrà

Thanks l-andorrà for your kind request, and I try to explain what I mean:
1- Buy or sell at the moment I activate the system.
2- for each buy or sell it executes a trade series with 20/30 pips of difference (for example in buy with 20 pips = 1.1000> 1.0980> 1.0960> 1.0940 and so on, and vice versa in sell) with a multiplication coefficient 1.61% (Example first trade 0.01 and then every 20 pips = 0.02> 0.03> 0.05> 0.08> 0.13 and so on).
3- Stop Loss xxx Pips for the total of open trades.
4- Total number of trades which must not exceed (for example 7) for a total of 0.53 lots in this case.
5- Target profit in currency of 10/20 Usd or Euro on the total open trades. If they are 1 or 3 or 5 or 7 trades open, they must always have a profit of 10/20 Usd or Euro. This is to be able to optimize it.
6- If possible add a trailing stop. In this case I can put a minimal trailing and let it run. See attachment "shared / rvt9ciKne" which doesn't perform as I would like. Please do a backtest if you want.

In any case, thank you very much if you can help me. It is now 9.00 pm in Garda Lake in Italy and I am tired of being glued to the computer.

Thanks again.
Giovanni

@l-andorrà

An other one : shared/uS6EIUtae

Thanks

@l-andorrà
Try also this one: shared/0m0DyukEd
Thanks.

Thanks. The copy is : shared/IZWQQODgb
Hope is Ok.

Hi
How do I go about attaching it correctly?
In any case, this is the sequence of the project:
1st block = NO TRADE> BUY NOW (OR SELL NOW)
2nd block = FOR EACH TRADE> PIPS AWAY FROM OPEN-PRICE> ADD TO VOLUME%.
To this I must add the profit and the stop loss in currency on the total of the trades executed, and the maximum number of trades beyond which it stops operating and waits for the profit target or the stop loss.
Thanks for your help.

there he is
shared/yQmnbjy3d
Thanks

Goodmorning everyone.
I would need help if someone were available.
Attached you will find a "Sell every xx Pips" system where I would need to add a profit in currency (for example 10/20 Usd or Euro) on the total of existing operations. The system provides a multiplier from 120% to 200% on each last trade made.
For example, with the 161% multiplier we have the following trades on last entry:
0.01-0.02-0.03-0.05-0.08-0.13-0.21 and so on.
I should add a profit of xx Usd to the system on the total of trades. and also the number of trades beyond which it does not open other trades, for example 6 or 7.
Can anyone help me ?
Thanks in advance.
Giovanni

@trader-philipps
Perhaps there is an error in your last project. See Attachment.
In the Risk Percent BUY NOW presents "cRiskPercent" while in the Risk Percent SELL NOW "2.5" is present. This is probably the error.
The system works properly, but you would be able to change the Trailing Stop as required ? Would be great
Alternatively, can you suggest me how to design the buy and sell every time when the second point is present? Tanks
fxdreema.com/shared/FrkxagS4e

@giovanni Hi trader. phillips
I had to interrupt the execution automatically because the system does not reflect the lots set with 2% risk. In fact, while in purchase it carries 0.01 lots, for sale it carries out 0.03 / 0.05 lots always on the same cross.
I would like to try to develop it myself, but I don't know how I should buy and sell at the second point as explained. It would also suffice to have a trailing stop as the default in Mt4 to have the correct system. For each open trade, immediately set the trailing stop of 5/7 pips.
I think it's a pretty simple thing for a professional like you.
Can you help me with a project? Thanks

If this is of your interest , these are the results from this morning at 8.00 to 17.00 PM my local time:
I used the trader.philipps system ( M5 with length 50 for all ) but with the trailing stop of defaul Mt4 with 50/70 points based on the following cross. EurUsd-GbpUsd-UsdJpy-EurJpy-UsdChf-UsdCad-AudUsd-EurGbp-NzdUsd.
20 Trades - 15 winnings - 3 Losses - 2 in draw
Max win on NZDUsd 19.6 Pips
Max loss on USDJPY 15.2 Pips
Total Pips in Profit = 73.4
Total Pips in Loss = 30.9
Total Pips in Profit end of day = 42.5
Once we get the changes on the system described above, we can start optimizing it.
We'll see tomorrow.

It's 11,30 am here. Brilliant sunshine on Garda Lake in Italy.
Today I used the trader.philipps system on nine crosses with a 5 minute time frame and 50 length. Not knowing yet how its logic works, I followed it closely. During the first three hours, he made more than 38 pips. Maybe today it was an exceptional day, but still made them.
As said yesterday, once it opened the trade, I use the Mt4 trailing stop with 50 points and I place the profit at 20 pips (I shouldn't do it, using the Mt4 trailing stop)
To make this system completely automatic, and I think it's profitable, the following changes should still be made:
1- Fixed lots to change daily based on the equity because I don't understand why it runs 0.01 lots and then 0.03 lots on another cross. ( or modify it properly )
2- Trailing stop as Mt4 with 50/100 points modifiable depending on the cross used and after optimization, without trailing start and trailing stop (I don't know how it works but it is valid)
3- Stop loss only when performing the reversal at the second point and not at the touch of the indicator.
4- No profit target (but only to be followed by trailing Mt4)
Excellent start and end day. For the 5 minutes I start at 07.00 in the morning and finish at 18.00 in the afternoon to avoid false signals, while for 60 minutes and more 00.00 to 24.00
I believe that once the changes have been made, the system can work well and make profits.

Yes. I am aware that there may be false signals.
For this reason I am satisfied with a few pips profit per trade helped by a correct trailing stop.

Good morning guys. And sorry for the delay in answer only because I've made some test.
Great job Trader.Philipps. Congratulations. And thanks to CPxiom for suggestions.
The new EA sent by trade.philipps, I am already using it on 9 crosses with a 60 minute time frame, with length 35, and once they have opened the trade, I will use the default trailing stop on Mt4 with 15 pips of trailing and a target price of 50 pips which I position manually . I believe that 90% of the trades can close in profit of a few pips, but if we consider 9 crosses, three or four trades per day on nine, the profit should be guaranteed.
The new EA posted is what I had imagined, but it should have a profit target and a stop loss in pips and not in percentage, and a trailing like by default Mt4 and make the reversal in loss to the second point is appear. In this case we have the reversal protection. That is: If I set 10 pips trailing start and 5 pips of trailing stop, if it reaches 20 pips and then retraces, our profit would still be 5 pips. In the test, many trades reached a profit of 20/30 pips and then closed at a loss
I noticed another strange thing: The risk percent rate (2) is not regular. executes 0.01 lots and then after a loss runs 0.06 lots. Perhaps it is better to have fixed lots and change them once a day if necessary.
Once modified, we will be able to start the optimization for the length and the trailing for each cross with at least one year of backtest and then we will compare our results.
Good evening everyone and Thanks again.

[0_1575319384439_StrategyTester EurUsd 60 M..htm](Uploading 100%)
Hi l' andorrà.
Unfortunately I can't post it because I'm no longer able to make it work. Many attempts, but I could not conclude anything.
However I say that the "trader.philipps" project is very good. I ask you and Trader.Philipps or others if anyone can make the following changes for the moment to his project above :
1- must trade in Sell and not just in Buy. I don't understand why in the Backtest from 01/01 / at today TF60 minutes has only made 4 trade in sell.
2- It must have the possibility in the setting to modify the length of the indicator and the deviation and the risk. So these parameters must be visible in the initial setting so you can optimize it with different time frames. For the attached backtest I had to use default length 20 while it should be 35
3- Must have the appropriate trailing start and traling stop in the setting. I mean that if the trailing start is placed at 15 pips in the 60 minute time frame and the trailing stop is 5 pips, if the price goes to 20 pips on profit and then retraces, the profit remains 5 pips.

The rest works beautifully, and the important thing is that Buy at the second point. Unfortunately it does not perform trades in Sell.

I will try again tomorrow to do something positive, but I doubt it. I'm too old to learn quickly. So I'll ask my programmer in Tainlandia if he can develop it even if it will cost me a lot of money.
With my best regards.

Thank you all for your information. Now I'll get to work on solving the problems.
For l'andorrà: I will try to insert the time as suggested. I guess it should be placed at the first point above "No Trade" This is very important for small time frames while for 240 minutes it should have no time limits. Also, unfortunately, it does not open the positions at the second point but only at the touch of the indicator. Help please.
For Trader.Philipps: Your project reflects as much as in my first post. But it only performs trade in buy and not in sell. Ok. to open the trades to the second point, but does not execute the reversal. Furthermore we should have the possibility to modify the BBands with different length and optimize it for each time frame.For example length 20 for 240 minutes and length 35 or more for shorter times.
Later I will post what I managed to do.
But, my initial project is very simple. (see post 1) All you need to do is settle for a few pips in profit (5/7) for each trade on multiple crosses and reach 30/50 pips per day, losses included. Just make it work in the second point reversal.
Thanks again, and it's nice to be able to share with those who know more than me.
Best regards.