Posts made by mmmmmmmmmm

@saeedkey سلام OrderSend error 13

خواستم بپرسم تونستی مشکل رو حل کنی ؟ من الان به این مشکل خوردم و نمیدونم چکار کنم

@chrisbe thank you man Your guidance was helpful

@chrisbe Thank you for your time

@chrisbe The loop capacity is not specified. Perhaps the number of fibs reaches 50 or 100. Based on the test we conducted, the capacity of each loop may be less than ten. However, overall, if this is correct, a solution can be found for it within the framework of your suggestion.

@chrisbe So I need the block "this block can create one object per bar" to be set to "yes".

@chrisbe Thank you. But as I mentioned, I need the previous fibs to remain, and whenever a fib reaches expiration conditions, it should be deleted; otherwise, it should stay...

@chrisbe I want only two fibo to be on the page according to your suggestion, and it should delete the fibos before the second one. If this works correctly, its effect will be evident. I'll try this and let you know.

@chrisbe Thanks for your suggestion. However, I need old fibs that have not expired. Fibs expire when the price goes above their level 6. If it doesn't go, the fib remains. Considering your suggestion, an idea came to my mind that if the problem is as you say, my idea is to group them in sets of 5 or 10. What do you think?

@chrisbe From the latest of them... My goal in this code is to find the latest Fibonacci and the latest white line.

@chrisbe The white lines are for Fibonacci level zero. It means that every Fibonacci drawn is represented by a white line on level zero. I did this to test the loop. However, even after some time of operation, the robot cannot even find these white lines. You can turn it off in the raw code. Also, by turning on the delete block, you can automatically delete any object that exits the Fibonacci range.

@chrisbe
I did what you said, but still didn't get any results

@chrisbe Thank you very much

@chrisbe I did not understand exactly what you meant. I have put this code file. Is it possible for you to add this to the code?

@chrisbe Would you please try it yourself? Thank you very much for your kindness

@chrisbe I put an arrow or text under each block. for each block separately

@chrisbe thank you. I tried all the blocks by text and arrow. But I still did not understand where the problem is. I would be grateful if you could help me

@l-andorrà Of course, this is a small and simple part of another project, which I separated to solve the problem. I did what you said. But I don't know if the problem is with the software or the code

@l-andorrà https://fxdreema.com/shared/6yNDfWRld

@l-andorrà I put the project link and the file itself. Thankful

سلام به همه دوستان . این یک کد ترسیم فیبوناچی با زیگزاگ هست . کد بسیار خوبی است و میتونید با توجه به تنظیمات مورد نظرتون برای زیگزاگ فیبوناچی های مختلفی ترسیم کنید . من در این کد یک مساله بزرگ دارم . دوستانی که میتونن کمکم کنن ممنون میشم . مشکل اینجاس برای لوپ کردن اخرین فیبوناچی :بالای صفحه لول صفر و لول 7 فیبوناچی رو طبق کد آخرین فیبوناچی رو اطلاعاتش رو لوپ و کامنت کردم . تا یه مدت همه چی درست کار میکنه و فیبوناچی ها رو منظم میکشه . ولی بعد از یه مدت فیبو هارو میکشه (ولی) لوپ دیگه کار نمیکنه و هر چی فیبوناچی که کشیده میشه اون اعداد بالا سمت چپ ثابت میمونه و تغیری نمیکنه . به عبارتی لوپ دیگه کار نمیکنه . خط های سفید لول صفر فیبو ها هستن که باز از اون تاریخ به بعد چون لوپ کار نمیکه اون خط ها هم کشیده نمیشه
. چون اون خط ها بر پایه فیبو ها هستن . مشکل اصلی من لوپ هست که از اون تاریخ به بعد دیگه کار نمیکه .ایا کسی میتونه مشکل لوپ اخرین فیبوناچی که بعد از یه مدت دیگه کار نمیکنه رو حل کنه ؟ در تاریخ 2023/01/04 که استارت کنید از ساعت 20:00 به بعد لوپ دیگه کار نمیکنه و اطلاعات کامنت که همون لول صفر و لول 7 اخرین فیبوناچی هست ثابت میمونه و تغیری نمیکنه . ممنون از همراهیتون

fibo.mq4
https://fxdreema.com/shared/6yNDfWRld