Posts made by piotras10000

@l-andorrà Okey thanks

@jstap Without these blocks, I wouldn't be able to see the data on the screen.
Such as "Balance, Profit, Currency ... Now you understand me?

@l-andorrà In the block 33 and 35, it all works very well.
Besides, I did not ask about these block

@jstap For me it is also it complicated to get it working properly. Hope someone experienced is here and help.

@l-andorrà Could you explain more about this modification in blocks 33 and 35. Because I don't really understand ???

That's what you meant ?

https://fxdreema.com/shared/EyUDmeLfb

@l-andorrà You could look at my project the "Formula" block could be so linked ?

https://fxdreema.com/shared/G9g5zRR0d

How to make "Drawdown" shown on the screen as a percentage. For example Drawdown: -3%, -10% ...

@jstap Thanks working:)

@jstap You could show it in the picture how to do it ?

@tipsywisdom Okey just which block to connect it to so that everything works fine ?

I have a question for forum members and experts. How do I make my EA only open 10 orders per day, for example, to reduce the risk of losing my deposit. Hope someone help me with this option how to do?

@jstap Show me a picture of how you got it connected

@jstap Just which block to connect it to ?

How do I set my robot to open a position only when the spread is, for example, 10? I will be grateful for your response.

my project https://fxdreema.com/shared/j1HOttLpb

@haoglueck Thanks for your help.

I changed "once per bar to 1" everything works

@piotras10000 said in My ea opens two same positions why ???:

@l-andorrà Even if I use one of the same indicator, it does not change anything, then my EA will open two positions. Do you have any other idea?

I changed to another https://fxdreema.com/shared/omBMLzDoc

@l-andorrà Even if I use one of the same indicator, it does not change anything, then my EA will open two positions. Do you have any other idea?

My EA opens two same positions? I would like him to only open one position at for every time. I just don't know how to do it to make everything work properly. Can someone write what needs to be done?

My project: https://fxdreema.com/shared/tlWGhH2bb

@l-andorrà Is there perhaps another option instead of using Trailingstop?

@l-andorrà For example, the stoploss is set to 1000 points. For example, to close at 200 points