PARTIAL CLOSE

[kestra]

@l-andorrà OKAY! I GET THAT, WHAT ABOUT OTHER CURRENCIES OR ARE THERE ANY OTHER EXCEPTIONS, LIKE GOLD, AND WHAT IS THE IMPLICATION OF THAT ME SECOND PICTURE ON OTHER CHARTS. WHAT I BASICALLY THINK IS THAT, MY THIRD RULE, 0.01 = 0.1 SHOULD ALSO WORK FOR GOLD AND ANY OTHER TWO DECIMAL PLACE ASSET, IS THAT POSSIBLE SIR? OR IF YOU ALREADY HAVE A LIST OF RUSES THAT WOULD WORK ON ALL ASSETS PLS SEND IT TO ME SIR. THANK YOU VERY MUCH SIR.

[kestra]

@l-andorrà HELLO SIR!

[bk7]

@kestra

better not use pips/points if you are not able to work with it.
I suggest you set/calculate the price levels for each trade you want to take volume out, or add volume to it limit each level to 1 once per trade. this would be the safest and probably also the easiest way...
The sizing of the trades you can choose as a multiple of what you take out and you can avoid this problem by default.

[kestra]

@bk7 I MAKE USE OF RENKO OFFLINE SO SINCE IT CAN DETECT POINTS ON THE CHARTS THEN I SHOULD GET THE PIPS JUST BY DIVIDING BY 10 WILL MY EA.

[bk7]

@kestra

if it works that way, you have solved all your issues on your own, great!

[kestra]

@bk7 MY THOUGH WAS THERE SHOULD BE SET OF RULES THAT WOULD WORK FOR ALL CHARTS, IF I CAN JUST JET THE LIST OF THE RULES!. LIKE THIS !

[kestra]

@bk7 THOUGH HAVE NOT TESTED THAT, I ONLY MADE USE OF THE DEFAULT SETTINGS!.

[bk7]

@kestra

you DONT HAVE TO WRITE ALL IN CAPITAL LETTERS...

you can check the full code in your mq4/mq5 file and adjust the rulset to your needs, so there are no limits!

[kestra]

@bk7 so i will get the list from there , thank you very much sir!.

[kestra]

@l-andorrà PLS SIR!

1. I STILL DON'T UNDERSTAND WHAT YOU MEAN BY GOLD DOES NOT USE THOSE VALUES. DO MEAN THAT THOSE VALUES WORK ONLY FOR CURRENCIES ?
2. I THINK 0.01 = 0.1 SHOULD WORK FOR GOLD AND OTHER TWO DECIMAL PLACE ASSETS
3. WHAT ABOUT FOR STOCKS, BONDS AND THE REST.

[l'andorrà]

@kestra As I said in my previous post, you need to add each symbol manually. You need to type it like this:

And you will have to do it for every stock, bond, index, etc.

[kestra]

@l-andorrà THANK YOU SIR! I GET THAT, FOR BROKER WITH 4 DECIMAL PLACE, WOULD I HAVE TO BUILD ITS OWN SEPARATE EA, SINCE ITS POINTS DIFFER FROM THE 5 DECIMAL PLACE BROKER, OR BY WRITING THE POINT TO PIP IN FORM OF NAME WOULD MAKE THE EA RECOGNISE THE DIFFERENCE! ? BASICALLY I WANT THE EA TO WORK ON THE TWO BROKERS WITHOUT ANY CONFUSION!.
OR IF IN THE GENERAL SETTINGS. WE CAN CHOOSE TO MAKE USE OF POINTS OR PIPS ALL THROUGH IN THE BUILDING OF THE EA THAT WOULD SOLVE IT!.

[jstap]

@kestra You would need to unless the names are different, then you could put it all in the same EA.

[l'andorrà]

@jstap Exactly. You can insert as many symbols as you want. You can combine values as far as they are not sharing the exact same name.

[kestra]

@l-andorrà THANK YOU VERY MUCH SIR!
I HAVE A ISSUE, BUT I BELIEVE THE EA IS WORKING FINE COS I HAVE BEING WATCHING IT FOR MONTHS NOW. BUT I DON'T KNOW IF THE ISSUE IS FROM THE BROKER. I SET IF THERE IS A PARTICULAR LOT SIZE, AND A SPECIFIC PIP IS MOVED FROM THE OPEN PRICE THE EA SHOULD CLOSE PARTIALLY, BUT SOMETIMES THE PIPS WOULD HAVE MOVE AND IT WONT DO THE PARTIAL CLOSE. SO I THOUGHT MAYBE THE BROKERS ARE DISABLING THE TRADE.[0_1629140964610_EL ELYON 1.mq4](Uploading 100%)

[kestra]

@l-andorrà 0_1629141213823_EL ELYON 1.mq4

[TipsyWisdom]

@kestra

you should look up what actually happens when you close partial trades in MT5.

If you are holding 1.0 lots and close a half lot. You are not simply closing half the position to .05. Maybe that is producing the error because it is unexpected

[kestra]

@tipsywisdom its mt4

[kestra]

@tipsywisdom it mt4 and its has being closing for example 1.0 lot to 0.5 lot on 50% closure but the issue is that some times the distance would have moved and it will not do any closing and i wold be watching it on the vps hope it would close.

[kestra]

@tipsywisdom look at this today and