Best posts made by l'andorrà

@davonitram Can you please share the link to your project?

@roar It works correctly for all symbols in my broker. It worked fine until yesterday!!!

I did as you suggested and now backtesting is working again, but I will do more in order to check no more issues arised dute to this change.

Also thank you to seb0 and ambrogio for your help.

@ajmd97fx ¡Es cierto! Cuarto años usando la plataforma y nunca me había fijado en ese detalle. Aun sigo aprendiendo cada día.

Pues me temo que eso está programado así por el creador. No soy programador, de modo que no tengo ni idea de cómo se pueden eliminar, lo siento.

@ajmd97fx An impressive work. Congratulations! Honestly, I wouldn't do it much better. You are working woth a lot of charts. That requires many blocks. Your logic is correct.

@davonitram Firstly, I recommend you to specify candle ID 1 in all operands of blocks 4,5 and 12. Then I guess your block 11 is where the block getting the engulfing conditions are met. Correct? If so you can do it this way (you will need 3 blocks):

@umbrellamaker Do you really ned those lines? As ras as I can see, you are using highs and lows and then plot lines on them. Why not just using those high/low values in your calculations? That would save a lot of coding pain.

@ambrogio That's true. MT5 is not as well developed in fxDReema as MT4. If the problem persists you should contact the admin to fix it.

@ajmd97fx That's hard programming man! A real programmer is required here.

@ambrogio All looks to the past need a loop. I'm afraid roar is the appropriate man to answer your question, not me, sorry.

@jstap Ok. Backward loops are not my field of expertise. The best user doing them is roar. Mr. roar, could you please take a look into this project?

@umbrellamaker You're welcome.

@ancient199 Miro is certainly one of the most powerful users in this forums. If you understand what he creates (and that's a completely different story) you can do great things. I tell you this because I'm not always sure to understand his complex logic and his command of custom code.

@umbrellamaker Certainly not a trivial thing to do. If I understand it correctly, every new candle should 'adjust' the value of the 0% level. Correct? But would the 100% level be stationary?

@ambrogio This is very weird. I strongly recommend you email the admin personally to let him know. I guess this can be a serious bug.

@catigger25

1. Percentatge of price means that if you select 10% and price is now 1.0000, you TP will be 1.1000. That means 10% of 1.0000.
2. Custom (price level) means you specify the price level: for example 1.2365.
3. Custom (pips) is exactly the same as fixed pips but with different words.
4. Custom (proce fraction) means you will use a indicator's value as your TP price.

@tradercompany Do this below all 'buy/sell now' blocks:

@fenixtrading You can do it this way:

@umbrellamaker First things first. If you look at the 'darw fibo' bloc you will see therer are 4 positions: Time(1), Price(1), Time (2) and Price (2). Those are the reference points to draw levels 0% and 100 % respectively. As you suggest, you can use variables to define any of those 4 points. But you will need a previous structure calculating them. Do you have something like that now?

@dre If you need to check if there was a crossing in the last 9 candles, you need to type 9 in the 'cross width' box instead of a 1, as it is now. Then you type 1 in the candle ID box. That will check if there was a crossing from candle ID1 and its 9 previous candles.

@qais-3 Is that block on the 'on tick' tab? If so that message will be activates ebery time a new tick arrives to your MT4.