This is not even a result from all these calculations. It seems that the Comment() function prefer to draw values as 4 diits, I don't know why. Don't look at that. You care of many digits there are when you put SL and TP, so when you write 10 pips, the actual distance of SL and TP to be... whatever you want - 10 points, 100 points, 1000 points.
The default in fxDreema is that when you write 10 pips in blocks, this will be translated into 0.001 in both, 4 and 5 digit brokers.
RSI is similar to MA - each point is a result from X candle values. Candles are built from few points as well - open, close, high, low, and in addition to that there are other points, like the medium price. So you can decide to built RSI based on one of these points. This has nothing to do with the count of ticks per minute.
In your case, you compare the value of RSI for the current candle, but because you have "Once per bar", you do that when the candle is brand new (a single point actually). The RSI value of that moment is something that will not stay the same for long, and you will never see it again, because it is temporary 
0.00001 = 0.0001 means that if the original digits are 5, the customized will be 4 and the EA will work as if the broker is 4 digits. Add/Remove some 0s from the right side and you will see.
Tell me, how can I help you if you are not reading me?
__This one has 2 buffers - 0 and 1, green and red. It seems that fxDreema is confused and decided that there is one more. It's interesting that the same thing happened with another indicator to another guy today
Otherwise the indicator is working with buffers 0 and 1, I just checked it. The only thing is that it is slow as hell for backtesting :)[/quote
3yhqu4f]
Again, this indicator works with buffers 0 and 1. Buffer 2 does not even exists!!! I know that fxDreema decides that buffer 2 exists, but this is a bug. There are two buffers for this indicator -> 0 and 1
By default all EAs work the same on 4 and 5 digits, they work as if the digits are 4. Here are the settings for this:
http://i.imgur.com/azkDKTr.png
But you can get information from objects on the chart. Well, not from indicator lines, because they does not exists as objects, but they are results from indicator buffers, so there is no need to read them as objects.
This block uses OrdersTotal() to calculate how many trades there are. This function is controlled by MetaTrader. So yes, it always gives you fresh information.
The problem comes from the fact that I use some cache inside block "Indicator moves within limits". It always returns the result from the first iteration, because the EA stays on the same candle. I will see if I can make it work for your case, and still using cache (to work faster in normal situation).
It does not create trades because you have the same indicator settings & buffer on both sides. Especially buffers - you have buffer 0 everywhere, which is the red line. What lines do you want to be crossed?
При всеки индикатор е различно, при този конкретно изглежда това е начина. Аз затова на всеки обяснявам за тия буфери, казвам да си го тества, да види реално с какви стойности разполага, а после ще намери начин да ги оползотвори. Един блок като "Indicator Appear" става за някои индикатори, за други не става. Но като знаеш, че индикатора ти е от тип MA и в 100% от времето има стойност, тогава трябва да ти стане ясно, че за "Appear" не може да се говори
А това дето нищо не ти излиза на графиката... мисля че мернах един единствен блок в тестов проект, само че така самостоятелен блок не работи, въобще не се включва в изходния файл. Трябва да е свързан с друг за да работи. Това правило е валидно засега, но може би подлежи на промяна в скоро време.
Here are the basics of how indicators work with the EA: https://fxdreema.com/documentation/gett ... indicators
And here is how to add them in fxDreema: https://fxdreema.com/documentation/proj ... indicators
Ummmm... are you aware that your blocks are located under "on Init", so the EA runs more like a Script - one time, when you add it?
Yes, the period starts from that candle to the left.
With Candle ID = 1
https://fxdreema.com/shared/GQqgu0Ffe
With Candle ID = 0
https://fxdreema.com/shared/easHDJ30e
Червен, син... не цветовете са важни, а стойностите в буферите. В случая всеки буфер има нормални стойности през цялото време. Отгоре съм показал как при това положение може да се засече преминаването от един цвят в друг. "Indicator Appear" обаче не може да се ползва за този индикатор, защото както вече стана явно - всички буфери имат нормални активни стойности през цялото време.
Well, at least you can use those indicators in the EAs
Trailing stop (each trade) can't do that and I will not include this into it, because it already has so much input parameters. But it should be possible with some custom loop. Here is a start: https://fxdreema.com/demo/mt4-loop-trailing-stop
С отместване Candle ID = 1
Проект: https://fxdreema.com/shared/JNawCB5qd
Резултат:
http://i.imgur.com/BJIZocr.png
Не е било това, аз винаги първо обяснявам и после показвам, и това едва ли е по-лесния вариант за мен.
Цветовете са лъжливи тука: http://i.imgur.com/Qj23Cvd.png
Оставям те да си мислиш над тия картинки докато свърша една работа
I don't think that these are all the rules, but here is an EA that does exactly this: https://fxdreema.com/shared/m7cE4zWce
And the result is here: http://prntscr.com/5t00fo Initial Buy trade, trailing stop, then closed on loss, then a new Sell without trailing stop.
The same story again
You are working with the current candle. The current candle moves up and down, it is unfinished. You get signals because in the middle of the candle RSI was at that level, but then changed. Look at RSI at the current candle, does it move?
Try with Candle ID = 1.