Hi, I'm hardly finding what is wrong on my EA but I can't find.

Please help me my project >> https://fxdreema.com/shared/FcviLARxe

Strategy = create pending order on fibo level and also set the SL & TP . After that delete the fibo (pending order still there also SL & TP)
***The problem is as picture below :
Picture No.1 vvvv Sell limit was created on Fibo level and also the SL/ TP.

Picture No.2 vvvv When fibo is deleted .. SL and TP is also disappeared.

Picture No.3 and 4 is the Buy condition >> there is no problem with Buy condition ( when Fibo deleted , the SL and TP still there)

The problem is with Selling condition. I don't know why ??? I think set everything like the Buy condition.

Please help if I have done something wrong. Thank you

May be this is another question about volume

 Hi, FXDREEMA ^^

As the topic said.... I have try For Each Trade block but it only find me the oldest and newest trade.
But I need to find the Lowest and Highest Level of Each buy and sell group

For example : When my EA open buys order there will be no sell order until the buy oders closed. And There will be not more than 10 orders of buys or sells. May be 5 or 6 or 4 up to the condition found.
In below picture the numbers showing -number 1 is oldest trade and 5 is newest trade . As I said... I want to find the highest level of trade (for Buy orders) and the number 4 is the highest.
Then If I found it ... I will Close all the five buy trades when the Highest level trade (number 4) reached 5% profit . (only number 4 profit ..not all orders)

(If the picture is not showing here ...you can look there)>> https://www.img.in.th/image/Qbn5wE

Please help

Hi , this is my 2nd topic of my project .
I made dash board D1 to M1 Timeframes as seen in the picture below (Right Lower) .
I made them by this method > https://fxdreema.com/shared/aVIiAmY6e

And The problem is I want the condition to be :
" If Green color shown More than 4 - go for BUY // If Red color shown More than 4 - go for Sell "
Not actually which timeframes .. just 4 of them are Green or Red.
But I have no idea to make this condition.

Please advise me .
Note : If you have another way of this condition to happen.. or showing this dash board on screen in another way please help.

Thank you

@jstap Ohhh Thank you so much ^^

@jstap This one Worked !!! https://fxdreema.com/shared/GTYhPegFc
Thank you so much for you help . But I Converted into MQL5 and delete objects must contains the line color and adjust some on and off block.

By the way... I have learned something new from you . I am very new to FXDREEMA and learning by searching other's problem in the forum.

Thanks again

@jstap Thank you so much .. But I think it doesn't work . I tried many ways by your helping Example shared. but it doesn't work I really don't know what I missed.
Here are the hole project share link :
https://fxdreema.com/shared/YpQj56LVc

@jobotgold1 said in How to stop horizontal Line from dynamic moving after someting happen.?:

@l-andorrà

Apologize for unclear writing. I am from Thailand and not so good at English .

I will explain the line strategy now .

The up line and down line made from The ADR (Average Daily Range) calculated by last 14 daily candles to find the Average Range the graph move in one day in pips.

@Condition1
When I got the Average daily Range in pips..
It will draw 2 Hori lines.

THE UP LINE made from Today's Lowest price +plus ADR (pips)

THE DOWN LINE made from Today's Highest price -minus ADR (pips)

#Delete both of them at 22.00 sever time everyday
#This condition will start at 01.00 am server time everyday

V
V
V
"The problem is" I want to stop these 2 lines immediately when price hit one of the lines and change their color.
And then delete them both at 22.00 server time

Tomorow it will start run @condition1

I also try to delete them and draw new line instead at the old lines point. But it is not working as picture in the next comment.

Thanks for your responding.

It is MT4
My 2 delete lines methods which are not working . the lines still same lines not deleted and not creating the new line after hitted.

• https://fxdreema.com/shared/UrbRYd1Kb
• https://fxdreema.com/shared/AcIgSdcKc

@jstap Ok I am going to share Thank you

@l-andorrà

Apologize for unclear writing. I am from Thailand and not so good at English .

I will explain the line strategy now .

The up line and down line made from The ADR (Average Daily Range) calculated by last 14 daily candles to find the Average Range the graph move in one day in pips.

@Condition1
When I got the Average daily Range in pips..
It will draw 2 Hori lines.

THE UP LINE made from Today's Lowest price +plus ADR (pips)

THE DOWN LINE made from Today's Highest price -minus ADR (pips)

#Delete both of them at 22.00 sever time everyday
#This condition will start at 01.00 am server time everyday

V
V
V
"The problem is" I want to stop these 2 lines immediately when price hit one of the lines and change their color.
And then delete them both at 22.00 server time

Tomorow it will start run @condition1

I also try to delete them and draw new line instead at the old lines point. But it is not working as picture in the next comment.

Thanks for your responding.

Hi.
I have a problem to stop horizontal Line from moving. Please Help

• My 2 Hori Line (as seen in the orange box in the chart) I gave them some distance Highest and Lowest price of current day if the Highest and Lowest price have changed the lines will move to keep the distance. (the value of distance changes everyday)

** I want to Stop them Both from moving at current price " when the current price Hit one of them either Up or down Hori line and then change the color of them both to notice that one of them are hitted" ...

Thank you I am looking forward for your help.

I alway searching in this forum about what I don't know and I alway got the sloving answer for my doubt here (Thanks Everyone) . But I search several times about How to delete trend line and I couldn't find the answer.

So I decided to post here.

Example For - Selling Condition
I draw trendline by zigzag and there will be two trendlines at a time due to my own condition by named them (not a prefix) . What I want is - when a candle breakout one of the trendline (breakout condition : Candle High is Above trendline and Candle Close is Below trendline)
I want to delete this line imediately after above condition .

And here (picture) I put again the same condition (breakout condition : Candle High is Above trendline and Candle Close is Below trendline) and followed by Delete object . The trendline is not deleting. *** I also put the block "For each object" and put the trendline name in to it. It doesn't delete too.

Please Help ><

25/8/2021 UPDATE !!!!

Ok Now I know The problem .. The trend line deleted But it appear again due to the condition Drawing from Zigzag
So. My next Question is.... how to make it deleted and then wait for the next round zigzag appearing.